How to Get Onyx ProductionHouse X 10.0.0.89 x86x64 [Multilanguage Crack] for Free Using Torrents
Driver Jinka 1351 60: A Review
If you are looking for a reliable and versatile cutting plotter that can handle various materials and designs, you might want to consider the driver jinka 1351 60. This cutting plotter is one of the products of Jinka Indonesia, a leading manufacturer of cutting plotters and related software. In this article, we will review the driver jinka 1351 60, covering its features, installation, usage, and troubleshooting. By the end of this article, you will have a better understanding of what this cutting plotter can do for you and how to make the most of it.
Onyx ProductionHouse X 10.0.0.89 x86x64 [Multilanguage Crack] download pc
What is driver jinka 1351 60?
A brief introduction to driver jinka 1351 60
The driver jinka 1351 60 is a cutting plotter that can cut various materials such as vinyl, paper, cardstock, fabric, leather, and more. It has a cutting width of 1260 mm and a cutting force of up to 500 g. It can also perform contour cutting, which means it can cut along the outline of an image or design. The driver jinka 1351 60 is compatible with Windows operating systems and supports various software such as CorelDraw, Adobe Illustrator, FlexiSign, Artcut, and more. It also comes with a USB port and an SD card slot for easy data transfer.
The main features of driver jinka 1351 60
Some of the main features of the driver jinka 1351 60 are:
It has a high-precision stepper motor that ensures smooth and accurate cutting.
It has a large LCD screen that displays the cutting status and settings.
It has a dual-position carriage that allows you to adjust the cutting pressure according to the material thickness.
It has a laser sensor that enables contour cutting by detecting the registration marks on the material.
It has a memory function that can store up to 4 MB of data and resume cutting after power off.
It has a low noise level and a long service life.
How to install driver jinka 1351 60?
The requirements for installing driver jinka 1351 60
To install the driver jinka 1351 60, you will need:
A computer with Windows XP/Vista/7/8/10 operating system.
A USB cable or an SD card.
The driver and software for the driver jinka 1351 60. You can download them from the official website of Jinka Indonesia or from other online sources .
A cutting material such as vinyl, paper, cardstock, etc.
The steps for installing driver jinka There are different ways to install the driver jinka depending on whether you use a USB cable or an SD card. Here are the general steps for both methods:
Connect the power cord to the cutting plotter and turn it on.
Connect the USB cable or insert the SD card to the cutting plotter and your computer.
If you use a USB cable, your computer will automatically detect the cutting plotter and install the driver. If not, you can manually install the driver by following the instructions on your screen or in the user manual.
If you use an SD card, you will need to copy the driver and software files from your computer to the SD card first. Then, insert the SD card to the cutting plotter and follow the instructions on your screen or in the user manual.
Once the installation is complete, you can launch the software and set up your preferences such as language, units, speed, force, etc.
You can also test your connection by sending a test cut from your software to your cutting plotter.
How to use driver jinka 1351?
The benefits of using driver jinka 1351
Using driver jinka 1351 can bring you many benefits such as:
You can cut various materials with different thicknesses and textures.
You can create custom designs with your own images or fonts.
You can perform contour cutting with ease and accuracy.
You can save time and money by cutting multiple copies at once.
You can enjoy high-quality and durable cuts that last long.
The tips and tricks for using driver jinka 1351
To use driver jinka 1351 effectively and efficiently, you should follow these tips and tricks:
Before cutting, make sure your material is clean, flat, and free of wrinkles or dust. You can also use a mat or tape to secure your material on the cutting surface.
Before contour cutting, make sure your image has clear and visible registration marks that match with your software settings. You can also use a pen tool to draw registration marks on your material if needed.
Before sending your cut, make sure your blade is sharp, clean, and adjusted properly according to your material thickness. You can also use a test cut function to check your blade depth, pressure, and offset.
After cutting, make sure you remove your material carefully from the cutting surface without damaging your cuts. You can also use a weeding tool to remove unwanted parts from your cuts if needed.
How to troubleshoot driver jinka 1351?
The common problems and solutions for driver jinka 1351
Sometimes, you may encounter some problems when using driver jinka 1351. Here are some common problems and solutions for them:
ProblemSolution
The cutting plotter does not turn on or respond.Check if the power cord is plugged in securely and if there is any damage or loose connection. Try another power outlet if possible. If still not working, contact your supplier or service center.
The computer does not recognize the cutting plotter or shows an error message.Check if the USB cable or SD card is connected properly and if there is any damage or dirt. Try another USB port or SD card slot if possible. Reinstall or update the driver and software if needed. If still not working, contact your supplier or service center.
The cutting plotter does not cut accurately or completely.Check if your material is aligned correctly and if there is any obstruction or slack on it. Check if your blade is sharp, clean, and adjusted properly according to your material thickness. Check if your speed, force, and offset settings are appropriate for your material type. Check if your contour cutting sensor is calibrated correctly and if there is enough contrast between your image and background. If still not working, contact your supplier or service center.
The cutting plotter makes loud noises or vibrates excessively.Check if there is any foreign object inside or around the cutting plotter that may cause friction or interference. Check if there is any wear or damage on Continuing the article. the belt, roller, or carriage. Lubricate or replace them if needed. If still not working, contact your supplier or service center.
The cutting plotter stops cutting or cuts randomly.Check if there is enough memory space on the cutting plotter or the SD card. Delete some files if needed. Check if there is any data corruption or interruption during the data transfer. Resend your cut if needed. Check if there is any power fluctuation or outage that may affect the cutting plotter. Use a stabilizer or a UPS if needed. If still not working, contact your supplier or service center.
The support and resources for driver jinka 1351
If you need more help or information about driver jinka 1351, you can refer to these support and resources:
The user manual that comes with the cutting plotter. It contains detailed instructions and illustrations on how to operate and maintain the cutting plotter.
The official website of Jinka Indonesia . It contains the latest updates and downloads for the driver and software, as well as FAQs, tutorials, and contact information.
The online forums and communities for cutting plotter users. You can find useful tips, tricks, and feedback from other users who have experience with driver jinka 1351 or similar products.
The customer service and technical support of Jinka Indonesia. You can reach them by phone, email, or online chat if you have any questions, complaints, or suggestions about driver jinka 1351.
Conclusion
A summary of the main points of the article
In conclusion, driver jinka 1351 is a cutting plotter that can cut various materials with high precision and quality. It has many features that make it easy to use and versatile, such as contour cutting, memory function, LCD screen, dual-position carriage, and more. It is compatible with Windows operating systems and various software such as CorelDraw, Adobe Illustrator, FlexiSign, Artcut, and more. It also comes with a USB port and an SD card slot for easy data transfer. To install driver jinka 1351, you will need a computer with Windows operating system, a USB cable or an SD card, the driver and software for the cutting plotter, and a cutting material. You can download the driver and software from the official website of Jinka Indonesia or from other online sources . To use driver jinka 1351, you should follow some tips and tricks such as cleaning your material, aligning your image, adjusting your blade, removing your cuts carefully, and more. To troubleshoot driver jinka 1351, you should check some common problems and solutions such as power cord connection, USB cable or SD card connection, blade adjustment, contour cutting sensor calibration, memory space availability, data transfer integrity, power stability, belt lubrication, etc. If you need more help or information about driver jinka 1351, you can refer to some support and resources such as the user manual, the official website of Jinka Indonesia , the online forums and communities for cutting plotter users, and the customer service and technical support of Jinka Indonesia.
A call to action for the readers
If you are interested in buying or learning more about driver jinka 1351, you can visit the official website of Jinka Indonesia or contact them directly. You can also check out some online reviews and testimonials from other users who have used this cutting plotter before. You will be amazed by what this cutting plotter can do for you and your projects. Don't hesitate to get your own driver jinka 1351 today!
FAQs
Here are some frequently asked questions about driver jinka 1351:
What is the price of driver jinka 1351?
The price of driver jinka 1351 may vary depending on the supplier, location, currency, tax, shipping cost, etc. You can contact your local supplier or Jinka Indonesia for a quotation.
What is the warranty of driver jinka 1351?
The warranty of driver jinka 1351 is one year from the date of purchase. The warranty covers any defects in materials or workmanship under normal use and service. The warranty does not cover any damage caused by misuse, abuse, negligence, accident, modification, improper installation or maintenance, natural disasters, power surges or failures, etc.
What are the accessories included with driver jinka 1351?
The accessories included with driver jinka 1351 are a power cord, a USB cable, a blade holder, three blades, a pen holder, a pen, a stand (optional), a user manual, and a CD-ROM with driver and software.
How to update the driver and software for driver jinka 1351?
You can update the driver and software for driver jinka 1351 by downloading them from the official website of Jinka Indonesia or from other online sources . You can also check for updates from within your software settings.
How to contact Jinka Indonesia?
You can contact Jinka Indonesia by phone at +62 21 2908 5577 / +62 21 2908 5578 / +62 21 2908 5579 / +62 21 2908 5580 / +62 21 2908 5581 / +62 21 2908 5582 / +62 21 2908 5583 / +62 21 2908 5584 / +62 21 2908 5585 / +62 21 2908 5586 / +62 21 2908 5587 / +62 21 2908 5588 / +62 21 2908 5589 / +62 Continuing the article. 21 2908 5590 / +62 21 2908 5591 / +62 21 2908 5592 / +62 21 2908 5593 / +62 21 2908 5594 / +62 21 2908 5595 / +62 21 2908 5596 / +62 21 2908 5597 / +62 21 2908 5598 / +62 21 2908 5599, by email at info@jinka-indonesia.com, or by filling out the contact form on their website . You can also visit their office at Jl. Raya Kalimalang No.88, Jatibening Baru, Pondok Gede, Bekasi, Jawa Barat, Indonesia.